video
Anesthesia Closed Circuit

Anesthesia Closed Circuit

Duo-limb circuit is a respiratory support system used in patients who require mechanical ventilation, especially those with respiratory failure. It consists of two separate lines - one for delivering oxygen (inspiratory line) and one for removing carbon dioxide (expiratory line). Co-axial circuit is a breathing circuit used in mechanical ventilation that is characterized by a single closed path for both the inspiratory and expiratory branches. This design increases efficiency and simplifies setup compared to traditional independent loops.

Product Introduction
Basic Info.

 

duo limb circuit of Disposable Ventilator Circuit
co-axial breathing circuit of Anesthesia Closed Circuit

Type

Length

Specification

Duo-limb Circuit

1.5m

1 Corrugated Duo-limb Tube+ 1 Straight Connectors+ 1 T connector +1 Elbow Connector + 1 Luer Cap + 1 limb (30cm) with 1 connector

1.8m

1 Corrugated Duo-limb Tube+ 1 Straight Connectors+ 1 T connector +1 Elbow Connector + 1 Luer Cap + 1 limb (30cm) with 1 connector

2.1m

1 Corrugated Duo-limb Tube+ 1 Straight Connectors+ 1 T connector +1 Elbow Connector + 1 Luer Cap + 1 limb (30cm) with 1 connector

2.4m

1 Corrugated Duo-limb Tube+ 1 Straight Connectors+ 1 T connector +1 Elbow Connector + 1 Luer Cap + 1 limb (30cm) with 1 connector

 

Co-axial Circuit

1.5m

1 Corrugated Co-axial Tube+ 1 Straight Connectors+ 1 T connector +1 Elbow Connector + 1 Luer Cap + 1 limb (30cm) with 1 connector

1.8m

1 Corrugated Co-axial Tube+ 1 Straight Connectors+ 1 T connector +1 Elbow Connector + 1 Luer Cap + 1 limb (30cm) with 1 connector

2.1m

1 Corrugated Co-axial Tube+ 1 Straight Connectors+ 1 T connector +1 Elbow Connector + 1 Luer Cap + 1 limb (30cm) with 1 connector

2.4m

1 Corrugated Co-axial Tube+ 1 Straight Connectors+ 1 T connector +1 Elbow Connector + 1 Luer Cap + 1 limb (30cm) with 1 connector

 

FAQ

 

Q: How can we guarantee the quality?

A: Always a pre-production sample before mass production;
Always final Inspection before shipment.

Q: Can I get free samples?

A: Under $10 is free. Over $10, We have to charge both samples and freight cost.

Q: Where is your factory located?

A: Our factory address is : Floor 5,Building 36,No 488-1 Donghu North Road, Donghu Sub-district, LinPing District, Hangzhou City, Zhejiang Province, China, 311100

Q: How can I get to your factory?

A: Our factory is near xiaoshan Airport, we can pick you up in the airport.

 

Hot Tags: anesthesia closed circuit, China anesthesia closed circuit manufacturers, suppliers, factory, Anaesthesia Breathing Circuit, Anaesthesia Circuit, Anesthesia Bain Circuit, Anesthesia Breathing Circuit Kit, Anesthesia Circuits Corrugated, Ventilator Circuits Corrugated

Send Inquiry

whatsapp

Phone

E-mail

Inquiry

Bag